Sletter packaging fra branches, blir så mye sølrelease-1.2

git-svn-id: https://svn.testnett.uninett.no/radsecproxy/branches/release-1.2@484 e88ac4ed-0b26-0410-9574-a7f39faa03bf

2 files changed, 0 insertions, 174 deletions

diff --git a/packaging/rpm/radsecproxy.spec b/packaging/rpm/radsecproxy.spec
deleted file mode 100644
index 5685080..0000000
--- a/packaging/rpm/radsecproxy.spec
+++ /dev/null
@@ -1,93 +0,0 @@
-Summary: radsecproxy is a generic RADIUS proxy that provides both RADIUS UDP and TCP/TLS (RadSec) transport.
-Name: radsecproxy
-Version: 1.0.alpha
-Release: 1
-Group: Applications/Communications
-License: BSD
-URL: http://software.uninett.no/radsecproxy
-Packager: Arnes <aaa-podpora@arnes.si>
-Source: http://software.uninett.no/radsecproxy/radsecproxy-1.0-alpha.tar.gz
-Source1: radsecproxy.sysv
-Source2: radsecproxy.1
-Source3: radsecproxy.conf.5
-Requires: openssl >= 0.9.7a
-
-BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
-BuildRequires: openssl-devel >= 0.9.7a
-
-%description
-radsecproxy is a generic RADIUS proxy that in addition to to
-usual RADIUS UDP transport, also supports TLS (RadSec). The
-aim is for the proxy to have sufficient features to be flexible,
-while at the same time to be small, efficient and easy to configure.
-Currently the executable on Linux is only about 48 Kb, and it uses
-about 64 Kb (depending on the number of peers) while running.
-
-The proxy was initially made to be able to deploy RadSec (RADIUS
-over TLS) so that all RADIUS communication across network links
-could be done using TLS, without modifying existing RADIUS software.
-This can be done by running this proxy on the same host as an existing
-RADIUS server or client, and configure the existing client/server to
-talk to localhost (the proxy) rather than other clients and servers
-directly.
-
-There may however be other situations where a RADIUS proxy might be
-useful. Some people deploy RADIUS topologies where they want to
-route RADIUS messages to the right server. The nodes that do purely
-routing could be using a proxy. Some people may also wish to deploy
-a proxy on a firewall boundary. Since the proxy supports both IPv4
-and IPv6, it could also be used to allow communication in cases
-where some RADIUS nodes use only IPv4 and some only IPv6.
-
-%prep
-%setup -n %{name}-1.0-alpha
-
-%build
-%{__make}
-
-%install
-%{__rm} -rf %{buildroot}
-%{__install} -D -m0644 radsecproxy.conf-example %{buildroot}%{_docdir}/%{name}-%{version}/radsecproxy.conf-example
-%{__install} -D -m0644 AUTHORS                  %{buildroot}%{_docdir}/%{name}-%{version}/AUTHORS
-%{__install} -D -m0644 ChangeLog                %{buildroot}%{_docdir}/%{name}-%{version}/ChangeLog
-%{__install} -D -m0644 COPYING                  %{buildroot}%{_docdir}/%{name}-%{version}/COPYING
-%{__install} -D -m0644 README                   %{buildroot}%{_docdir}/%{name}-%{version}/README
-%{__install} -D -m0755 radsecproxy              %{buildroot}%{_sbindir}/radsecproxy
-%{__install} -D -m0755 %{SOURCE1}               %{buildroot}%{_initrddir}/radsecproxy
-%{__install} -D -m0644 %{SOURCE2}               %{buildroot}%{_mandir}/man1/radsecproxy.1
-%{__install} -D -m0644 %{SOURCE3}               %{buildroot}%{_mandir}/man5/radsecproxy.conf.5
-
-%clean
-%{__rm} -rf %{buildroot}
-
-%post
-/sbin/chkconfig --add radsecproxy
-
-%preun
-if [ $1 -eq 0 ]; then
-        /sbin/service radsecproxy stop &>/dev/null || :
-        /sbin/chkconfig --del radsecproxy
-fi
-
-%postun
-if [ $1 -ge 1 ]; then
-        /sbin/service radsecproxy condrestart &> /dev/null || :
-fi
-
-%files
-%defattr(-, root, root, 0755)
-%config %{_initrddir}/radsecproxy
-%{_sbindir}/radsecproxy
-%doc %{_docdir}/%{name}-%{version}/AUTHORS
-%doc %{_docdir}/%{name}-%{version}/ChangeLog
-%doc %{_docdir}/%{name}-%{version}/COPYING
-%doc %{_docdir}/%{name}-%{version}/README
-%doc %{_docdir}/%{name}-%{version}/radsecproxy.conf-example
-%doc %{_mandir}/man1/radsecproxy.1.gz
-%doc %{_mandir}/man5/radsecproxy.conf.5.gz
-
-%changelog
-* Thu Jun 07 2007 Rok Papez <aaa-podpora@arnes.si> - 1.0-alpha.1
-- Initial packaging of the 1.0-alpha.1 release 
-- Added SysV/RedHat init script
-- Added radsecproxy manages
diff --git a/packaging/rpm/radsecproxy.sysv b/packaging/rpm/radsecproxy.sysv
deleted file mode 100644
index 38a5055..0000000
--- a/packaging/rpm/radsecproxy.sysv
+++ /dev/null
@@ -1,81 +0,0 @@
-#!/bin/bash
-#
-# init script for radsecproxy
-#
-# chkconfig: 345 95 05
-# description: RADIUS UDP and RADSEC proxy
-#
-# config: /etc/radsecproxy.conf
-
-source /etc/init.d/functions
-source /etc/sysconfig/network
-
-# Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
-
-[ -x /usr/sbin/radsecproxy ] || exit 1
-[ -f /etc/radsecproxy.conf ] || exit 1
-
-RETVAL=0
-prog="radsecproxy"
-desc="RADSEC Proxying"
-
-start() {
-	echo -n $"Starting $desc ($prog): "
-	daemon /usr/sbin/$prog || RETVAL=1
-
-	if [ $RETVAL -eq 0 ]; then
-		success "$prog startup"
-		rm -f /var/lock/subsys/$prog
-	else
-		failure "$prog startup"
-	fi
-
-	echo
-	return $RETVAL
-}
-
-stop() {
-	echo -n $"Stopping $desc ($prog): "
-	killproc $prog || RETVAL=1
-
-	if [ $RETVAL -eq 0 ]; then
-		success "$prog shutdown"
-		rm -f /var/lock/subsys/$prog
-	else
-		failure "$prog shutdown"
-	fi
-
-	echo
-	return $RETVAL
-}
-
-restart() {
-	stop
-	start
-}
-
-case "$1" in
-  start)
-	start
-	;;
-  stop)
-	stop
-	;;
-  restart|reload)
-	restart
-	;;
-  condrestart)
-	[ -e /var/lock/subsys/$prog ] && restart
-	RETVAL=$?
-	;;
-  status)
-	status $prog
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage $0 {start|stop|restart|reload|condrestart|status}"
-	RETVAL=1
-esac
-
-exit $RETVAL