drop old modulessunet-ops-2015-05-09-v12

9 files changed, 0 insertions, 1271 deletions

diff --git a/global/overlay/etc/puppet/modules/sunet/templates/cloudimage/mk_cloud_image.erb b/global/overlay/etc/puppet/modules/sunet/templates/cloudimage/mk_cloud_image.erb
deleted file mode 100644
index 3f139db..0000000
--- a/global/overlay/etc/puppet/modules/sunet/templates/cloudimage/mk_cloud_image.erb
+++ /dev/null
@@ -1,115 +0,0 @@
-#!/bin/bash
-
-# do not edit by hand
-
-src_image="<%= @image_src %>"
-size="<%= @size %>"
-dhcp="<%= @dhcp ? 'yes' : 'no' %>"
-hostname="<%= @name %>"
-bridge="<%= @bridge %>"
-cpus="<%= @cpus %>"
-mem="<%= @memory %>"
-repo="<%= @repo %>"
-tag="<%= @tagpattern %>"
-ip="<%= @ip %>"
-gateway="<%= @gateway %>"
-netmask="<%= @netmask %>"
-resolver="<%= @resolver %>"
-ip6="<%= @ip6 %>"
-gateway6="<%= @gateway6 %>"
-netmask6="<%= @netmask6 %>"
-password="<%= @password %>"
-
-
-cd "/var/lib/libvirt/cloud-init"
-
-id=$(uuidgen)
-
-seed=${hostname}_seed.img
-disk=${hostname}.img
-
-rm -f ${seed}
-truncate --size 2M ${seed}
-mkfs.vfat -n cidata ${seed} 2>/dev/null
-
-if [ "x${password}" != "x" ]; then
-   pass="password: ${password}"
-fi
-
-user_data=$(mktemp)
-cat > ${user_data} <<EOF
-#cloud-config
-user: root
-ssh_pwauth: False
-ssh_authorized_keys:
-   - ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDVvB4gdJ6EWRmx8xUSxrhoUNnWxEf8ZwAqhzC1+7XBY/hSd/cbEotLB9gxgqt0CLW56VU4FPLTw8snD8tgsyZN6KH1Da7UXno8oMk8tJdwLQM0Ggx3aWuztItkDfBc3Lfvq5T07YfphqJO7rcSGbS4QQdflXuOM9JLi6NStVao0ia4aE6Tj68pVVb3++XYvqvbU6NtEICvkTxEY93YpnRSfeAi64hsbaqSTN4kpeltzoSD1Rikz2aQFtFXE03ZC48HtGGhdMFA/Ade6KWBDaXxHGARVQ9/UccfhaR2XSjVxSZ8FBNOzNsH4k9cQIb2ndkEOXZXnjF5ZjdI4ZU0F+t7 leifj+00060AD478D6@sunet.se
-runcmd:
-   - ["mkdir","/tmp/seed"]
-   - ["mount","/dev/vdb","/tmp/seed"]
-   - ["cp","/tmp/seed/bootstrap-cosmos.sh","/tmp/seed/cosmos_1.2-2_all.deb","/root"]
-   - ["cd","/root"]
-   - "cd /root && /root/bootstrap-cosmos.sh ${hostname} ${repo} ${tag}"
-disable_root: 0
-EOF
-
-meta_data=$(mktemp)
-cat > ${meta_data} <<EOF
-#cloud-config
-instance-id: iid-${id}
-local-hostname: ${hostname}
-disable_root: 0
-EOF
-
-dns=""
-if [ "x${resolver}" != "x" ]; then
-   dns="dns-nameservers ${resolver}"
-fi
-
-if [ "x${dhcp}" = "xyes" ]; then
-cat >> ${meta_data} <<EOF
-network-interfaces: |
-    auto eth0
-    iface eth0 inet dhcp
-    ${dns}
-EOF
-else
-  if [ "x${ip}" != "x" ]; then
-     cat >> ${meta_data} <<EOF
-network-interfaces: |
-    auto eth0
-    iface eth0 inet static
-        address ${ip}
-        netmask ${netmask}
-        gateway ${gateway}
-        ${dns}
-
-EOF
-  fi
-
-  if [ "x${ip6}" != "x" ]; then
-     cat >> ${meta_data} <<EOF
-network-interfaces: |
-    auto eth0
-    iface eth0 inet6 static
-        address ${ip6}
-        netmask ${netmask6}
-        gateway ${gateway6}
-        ${dns}
-
-EOF
-  fi
-fi
-
-mcopy -i ${seed} ${user_data} ::user-data 2>/dev/null
-mcopy -i ${seed} ${meta_data} ::meta-data 2>/dev/null
-mcopy -i ${seed} /etc/cosmos/apt/bootstrap-cosmos.sh /etc/cosmos/apt/cosmos_1.2-2_all.deb ::
-mkdir -p "/var/lib/libvirt/images/${hostname}"
-mv ${seed} "/var/lib/libvirt/images/${hostname}"
-virsh pool-refresh default
-
-virsh vol-clone --pool default ${src_image} ${hostname}/${disk}
-
-virt-install -r ${mem} -n ${hostname} --vcpus=${cpus} --autostart --memballoon virtio --network bridge=${bridge} --boot hd --disk path=/var/lib/libvirt/images/${hostname}/${disk},format=qcow2,bus=virtio --disk path=/var/lib/libvirt/images/${hostname}/${seed},bus=virtio
-
-rm -f ${user_data}
-rm -f ${meta_data}
diff --git a/global/overlay/etc/puppet/modules/sunet/templates/dockerhost/20unbound.erb b/global/overlay/etc/puppet/modules/sunet/templates/dockerhost/20unbound.erb
deleted file mode 100755
index 0374ac7..0000000
--- a/global/overlay/etc/puppet/modules/sunet/templates/dockerhost/20unbound.erb
+++ /dev/null
@@ -1,98 +0,0 @@
-#!/bin/bash
-#
-# This script registers/removes docker containers IP addresses
-# from the local unbound resolver in the post-start / pre-stop actions.
-#
-# For action pre-start, it checks if there is a CID file that needs to be
-# cleaned away to not prevent the new container from starting.
-#
-
-# sunet_docker_pre-post: CID d05a0842ce1700ee3328d42ccf5c2f29cc3d71fa6dcc6a72f994f8d032453be7
-# sunet_docker_pre-post: ACTION pre-stop
-# sunet_docker_pre-post: IMAGE docker.sunet.se/eduid/eduid-mm-service
-# sunet_docker_pre-post: NAME eduid-mm-service
-#for e in "CID" "ACTION" "IMAGE" "NAME"; do
-#    logger -t sunet_docker_pre-post "$e `printenv $e`"
-#done
-
-logtag="sunet_docker_pre-post[$ACTION]"
-logger -t "${logtag}" "$NAME ($IMAGE), CID: '$CID'"
-
-if [ "x$ACTION" = "xpre-start" ]; then
-    # Work-around: if unbound is not running when a container starts, it will get
-    # an incorrect /etc/resolv.conf (SUNET resolvers). It will then later on be
-    # unable to resolv .docker hostnames.
-    service unbound status > /dev/null
-    if [ $? -ne 0 ]; then
-    for retry in 1 2 3 4 5 6 7 8 9 10; do
-        sleep 3
-        logger -t "${logtag}" "Waiting for service unbound"
-        service unbound status > /dev/null
-        if [ $? -eq 0 ]; then
-            break
-        fi
-    done
-    fi
-
-    service unbound status > /dev/null
-    if [ $? -ne 0 ]; then
-	logger -t "${logtag}" "Service unbound not running! Aborting."
-	exit 0
-    fi
-    if [ -f "${CIDFILE}" ]; then
-        # Clean away the CID file in pre-start if the container is in fact not running
-	docker inspect "${CID}" 2>/dev/null || (
-	    logger -t "${logtag}" "Removing left-over CID file '${CIDFILE}' (CID ${CID})";
-	    rm -f "${CIDFILE}"
-	  )
-    fi
-
-    # Remove any stopped container with this name to prevent the docker start script
-    # from just restarting that one (instead of starting the currently tagged image,
-    # which might be newer than the one used by the old container)
-    docker inspect "${NAME}" && docker rm "${NAME}"
-    exit 0
-fi
-
-if [ "x${CID}" = "x" ]; then
-    CID=$(docker inspect --format '{{ .Id }}' "${NAME}" 2>/dev/null)
-
-    if [ "x${CID}" = "x" ]; then
-	# sometimes containers start slow...
-	for retry in 1 2 3 4 5; do
-	    sleep 1
-	    logger -t "${logtag}" "Retrying CID lookup for ${NAME}"
-	    CID=$(docker inspect --format '{{ .Id }}' "${NAME}" 2>/dev/null)
-	    if [ "x${CID}" != "x" ]; then
-		break
-	    fi
-	done
-    fi
-
-    if [ "x${CID}" = "x" ]; then
-	logger -t "${logtag}" "No CID provided or found! Aborting."
-	exit 0
-    fi
-
-    logger -t "${logtag}" "Found CID ${CID} using docker inspect on '${NAME}'"
-fi
-
-# Remove registered name.
-# XXX this does NOT handle multiple instances of the same image running on
-# a single Docker host!
-logger -t "${logtag}" "Un-registering ${NAME}.docker"
-unbound-control local_data_remove "${NAME}.docker." > /dev/null
-
-# If it is a container starting up, register it's IP address
-if [ "x$ACTION" = "xpost-start" ]; then
-    ip=$(docker inspect --format '{{ .NetworkSettings.IPAddress }}' "${CID}" 2>/dev/null)
-    if [ "x${ip}" = "x" ]; then
-	logger -t "${logtag}" "Failed to get IP from CID ${CID}. Aborting."
-	exit 0
-    fi
-    unbound-control local_data "${NAME}.docker. 60 IN A ${ip}" > /dev/null
-    # Register reverse pointer - there is no local_data_ptr command unfortunately
-    ptr=$(echo "${ip}" | awk -F . '{print $4"."$3"."$2"."$1".in-addr.arpa."}')
-    unbound-control local_data "${ptr} 60 IN PTR ${NAME}.docker."
-    logger -t "${logtag}" "Registered ${NAME}.docker at ${ip}"
-fi
diff --git a/global/overlay/etc/puppet/modules/sunet/templates/dockerhost/logrotate_docker-containers.erb b/global/overlay/etc/puppet/modules/sunet/templates/dockerhost/logrotate_docker-containers.erb
deleted file mode 100644
index 6cf5fe9..0000000
--- a/global/overlay/etc/puppet/modules/sunet/templates/dockerhost/logrotate_docker-containers.erb
+++ /dev/null
@@ -1,7 +0,0 @@
-/var/lib/docker/containers/*/*.log {
-  rotate 7
-  daily
-  compress
-  delaycompress
-  copytruncate
-}
diff --git a/global/overlay/etc/puppet/modules/sunet/templates/dockerhost/unbound_docker.conf.erb b/global/overlay/etc/puppet/modules/sunet/templates/dockerhost/unbound_docker.conf.erb
deleted file mode 100644
index f6bb382..0000000
--- a/global/overlay/etc/puppet/modules/sunet/templates/dockerhost/unbound_docker.conf.erb
+++ /dev/null
@@ -1,5 +0,0 @@
-server:
-	local-zone: docker. static
-	interface: 127.0.0.1
-	interface: 172.17.42.1
-	access-control: 172.16.0.0/12 allow
diff --git a/global/overlay/etc/puppet/modules/sunet/templates/flog/dotenv.erb b/global/overlay/etc/puppet/modules/sunet/templates/flog/dotenv.erb
deleted file mode 100644
index bcd167b..0000000
--- a/global/overlay/etc/puppet/modules/sunet/templates/flog/dotenv.erb
+++ /dev/null
@@ -1,18 +0,0 @@
-ALLOWED_HOSTS='flog.sunet.se flog_app.docker 192.36.125.10 2001:6b0:7::10'
-EDUROAM_META_DATA='/opt/flog/institution.xml'
-SENTRY_DSN='https://1ac5a19b73d04d91995055a81710e537:c31c3e5a162f477e8d6a9665aa134f8a@sentry.nordu.net/4'
-EMAIL_HOST='localhost'
-EMAIL_HOST_PASSWORD=''
-EMAIL_HOST_USER=''
-EMAIL_PORT=''
-DB_ENGINE='django.db.backends.postgresql_psycopg2'
-DB_NAME='flog'
-DB_USER='flog'
-DB_PASSWORD='<%= @postgres_password %>'
-DB_HOST='flog_db.docker'
-DB_PORT=5432
-#CACHE_BACKEND='django.core.cache.backends.db.DatabaseCache'
-#CACHE_LOCATION='flog_cache_table'
-CACHE_BACKEND='django.core.cache.backends.memcached.MemcachedCache'
-CACHE_LOCATION='memcached.docker:11211'
-STATIC_URL='/static/'
diff --git a/global/overlay/etc/puppet/modules/sunet/templates/ici_ca/ca.config.erb b/global/overlay/etc/puppet/modules/sunet/templates/ici_ca/ca.config.erb
deleted file mode 100644
index 86eb224..0000000
--- a/global/overlay/etc/puppet/modules/sunet/templates/ici_ca/ca.config.erb
+++ /dev/null
@@ -1,8 +0,0 @@
-ICI_CA_KEY_ID=<%= @pkcs11_key_id %>
-ICI_CA_KEY_SLOT=<%= @pkcs11_key_slot %>
-ICI_PKCS11=<%= @pkcs11_module %>
-ICI_PKCS11_PIN=<%= @pkcs11_pin %>
-ICI_MD=sha256
-ICI_PUBLIC_URL=<%= @public_repo_url %>
-SOFTHSM_CONF=/var/lib/ici/<%= @name %>/softhsm.conf
-export SOFTHSM_CONF
diff --git a/global/overlay/etc/puppet/modules/sunet/templates/nagioshost/check_reboot.erb b/global/overlay/etc/puppet/modules/sunet/templates/nagioshost/check_reboot.erb
deleted file mode 100755
index aa0bd5d..0000000
--- a/global/overlay/etc/puppet/modules/sunet/templates/nagioshost/check_reboot.erb
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/bash
-declare -rx PROGNAME=${0##*/}
-declare -rx PROGPATH=${0%/*}/
-
-function cleanup {
-	#if [ -e "$TMPFILE" ] ; then
-		#rm "$TMPFILE"
-	#fi
-	exit $1
-}
-
-if [ -r "${PROGPATH}utils.sh" ] ; then
-	source "${PROGPATH}utils.sh"
-else
-	echo "Can't find utils.sh."
-	printf "Currently being run from %s\n" "$PROGPATH"
-	# since we couldn't define STATE_UNKNOWN since reading utils.sh failed, we use 3 here but everywhere else after this use cleanup $STATE
-	cleanup 3
-fi
-
-STATE=$STATE_UNKNOWN
-
-
-if [ -f /var/run/reboot-required.pkgs ]
-then
-	pkg=`cat /var/run/reboot-required.pkgs`
-fi
-
-if [ -f /var/run/reboot-required ]
-then
-	echo "Reboot WARNING: System reboot required by package $pkg"
-        cleanup $STATE_WARNING;
-fi
-      echo "Reboot OK: No reboot required"
-      cleanup $STATE_OK;
-cleanup $STATE;
- 
diff --git a/global/overlay/etc/puppet/modules/sunet/templates/nagioshost/check_uptime.pl.erb b/global/overlay/etc/puppet/modules/sunet/templates/nagioshost/check_uptime.pl.erb
deleted file mode 100755
index dda05e4..0000000
--- a/global/overlay/etc/puppet/modules/sunet/templates/nagioshost/check_uptime.pl.erb
+++ /dev/null
@@ -1,721 +0,0 @@
-#!/usr/bin/perl -w
-#
-# ============================== SUMMARY =====================================
-#
-# Program : check_uptime.pl
-# Version : 0.52
-# Date    : June 19, 2012
-# Authors : William Leibzon - william@leibzon.org
-# Licence : GPL - summary below, full text at http://www.fsf.org/licenses/gpl.txt
-#
-# =========================== PROGRAM LICENSE =================================
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-# ===================== INFORMATION ABOUT THIS PLUGIN =========================
-#
-#  This plugin returns uptime of the system returning data in text (readable)
-#  format as well as in minutes for performance graphing. The plugin can either
-#  run on local system unix system (that supports standard 'uptime' command
-#  or check remote system by SNMP. The plugin can report one CRITICAL or
-#  WARNING alert if system has been rebooted since last check.
-#
-# ======================  SETUP AND PLUGIN USE NOTES  =========================
-#
-#  The plugin can either retrieve information from local system (when you
-#  run it through check_nrpe for example) or by SNMP from remote system.
-#
-#  On local system it will execute standard unix 'uptime' and 'uname -a'.
-#
-#  On a remote system it'll retrieve data from sysSystem for system type
-#  and use that to decide if further data should be retrieved from 
-#    sysUptime (OID 1.3.6.1.2.1.1.3.0) for windows or 
-#    hostUptime (OID 1.3.6.1.2.1.25.1.1.0) for unix system or
-#    snmpEngineTime (OID 1.3.6.1.6.3.10.2.1.3) for cisco switches
-#
-#  For information on available options please execute it with --help i.e:
-#    check_uptime.pl --help
-#
-#  As I dont have time for extensive documentation below is all very brief:
-#
-#  1. You can also specify warning and critical thresholds which will
-#     give warning or critical alert if system has been up for lees then
-#     specified number of minutes. Example: 
-#        check_uptime.pl -w 5
-#     Will give warning alert if system has been up for less then 5 minutes
-#
-#  2. For performance data results you can use '-f' option which will give
-#     total number of minutes the system has been up.
-#
-#  3. A special case is use of performance to feed data from previous run
-#     back into the plugin. This is used to cache results about what type
-#     of system it is (you can also directly specify this with -T option)
-#     and also means -w and -c threshold values are ignored and instead
-#     plugin will issue ONE alert (warning or critical) if system uptime
-#     changes from highier value to lower
-#
-# ============================ EXAMPLES =======================================
-#
-# 1. Local server (use with NRPE or on nagios host), warning on < 5 minutes:
-#
-# define command {
-#        command_name check_uptime
-#        command_line $USER1$/check_uptime.pl -f -w 5
-# }
-# 
-# 2. Local server (use with NRPE or on nagios host), 
-#    one critical alert on reboot:
-#
-# define command {
-#        command_name check_uptime
-#        command_line $USER1$/check_uptime.pl -f -c -P "SERVICEPERFDATA$"
-# }
-#
-# 3. Remote server SNMP v2, one warning alert on reboot,
-#    autodetect and cache type of server:
-#
-# define command {
-#        command_name check_snmp_uptime_v2
-#        command_line $USER1$/check_uptime.pl -2 -f -w -H $HOSTADDRESS$ -C $_HOSTSNMP_COMMUNITY$ -P "$SERVICEPERFDATA$"
-# }
-#
-# 4. Remote server SNMP v3, rest as above
-#
-#define command {
-#        command_name check_snmp_uptime_v3
-#        command_line $USER1$/check_uptime.pl -f -w -H $HOSTADDRESS$ -l $_HOSTSNMP_V3_USER$ -x $_HOSTSNMP_V3_AUTH$ -X $_HOSTSNMP_V3_PRIV$ -L sha,aes -P "$SERVICEPERFDATA$"
-# }
-# 
-# 5. Example of service definition using above
-#
-# define service{
-#      use				std-service
-#      hostgroup_name			all_snmp_hosts
-#      service_description		SNMP Uptime
-#      max_check_attempts               1
-#      check_command			check_snmp_uptime
-# }
-#
-# 6. And this is optional dependency definition for above which makes
-#    every SNMP service (service beloning to SNMP servicegroup) on
-#    same host dependent on this SNMP Uptime check. Then if SNMP
-#    daemon goes down you only receive one alert
-#
-# define servicedependency{
-#        service_description SNMP Uptime
-#        dependent_servicegroup_name snmp
-# }
-#
-# ============================= VERSION HISTORY ==============================
-#
-# 0.1 - sometime 2006 : Simple script for tracking local system uptime
-# 0.2 - sometime 2008 : Update to get uptime by SNMP, its now alike my other plugins 
-# 0.3 -  Nov 14, 2009 : Added getting system info line and using that to decide
-#		        format of uptime line and how to process it. Added support
-#			for getting uptime with SNMP from windows systems.
-#			Added documentation header alike my other plugins.
-#			Planned to release it to public, but forgot.
-# 0.4  - Dec 19, 2011 : Update to support SNMP v3, released to public
-# 0.41 - Jan 13, 2012 : Added bug fix by Rom_UA posted as comment on Nagios Exchange
-#			Added version history you're reading right now.
-# 0.42 - Feb 13, 2012 : Bug fix to not report WARNING if uptime is not correct output
-# 0.5  - Feb 29, 2012 : Added support for "netswitch" engine type that retrieves
-#		        snmpEngineTime. Added proper support for sysUpTime interpreting
-#			it as 1/100s of a second and converting to days,hours,minutes
-#			Changed internal processing structure, now reported uptime
-#			info text is based on uptime_minutes and not separate.
-# 0.51 - Jun 05, 2012 : Bug fixed for case when when snmp system info is < 3 words.
-# 0.52 - Jun 19, 2012 : For switches if snmpEngineTime OID is not available,
-#		        the plugin will revert back to checking hostUptime and
-#			then sysUptime. Entire logic has in fact been changed
-#			to support trying more than just two OIDs. Also added
-#			support to specify filename to '-v' option for debug
-#		        output to go to instead of console and for '--debug'
-#			option as an alias to '--verbose'.
-# 
-# TODO:
-#   0) Add '--extra-opts' to allow to read options from a file as specified
-#      at http://nagiosplugins.org/extra-opts. This is TODO for all my plugins
-#   1) Add support for ">", "<" and other threshold qualifiers
-#      as done in check_snmp_temperature.pl or check_mysqld.pl
-#   2) Support for more types, in particular network equipment such as cisco: [DONE]
-#      	     sysUpTime is a 32-bit counter in 1/100 of a second, it rolls over after 496 days
-#            snmpEngineTime (.1.3.6.1.6.3.10.2.1.3) returns the uptime in seconds and will not
-#            roll over, however some cisco switches (29xx) are buggy and it gets reset too.
-#            Routers running 12.0(3)T or higher can use the snmpEngineTime object from
-#            the SNMP-FRAMEWORK-MIB.  This keeps track of seconds since SNMP engine started.
-#   3) Add threshold into perfout as ';warn;crit'
-#
-# ========================== START OF PROGRAM CODE ===========================
-
-use strict;
-use Getopt::Long;
-
-# Nagios specific
-our $TIMEOUT;
-our %ERRORS;
-eval 'use utils qw(%ERRORS $TIMEOUT)';
-if ($@) {
- $TIMEOUT = 10;
- %ERRORS = ('OK'=>0,'WARNING'=>1,'CRITICAL'=>2,'UNKNOWN'=>3,'DEPENDENT'=>4);
-}
-
-our $no_snmp=0;
-eval 'use Net::SNMP';
-if ($@) {
-  $no_snmp=1;
-}
-
-# Version 
-my $Version='0.52';
-
-# SNMP OID
-my $oid_sysSystem = '1.3.6.1.2.1.1.1.0';	     # windows and some unix
-my $oid_hostUptime = '1.3.6.1.2.1.25.1.1.0';         # hostUptime, usually unix systems
-my $oid_sysUptime = '1.3.6.1.2.1.1.3.0';             # sysUpTime, windows
-my $oid_engineTime = '1.3.6.1.6.3.10.2.1.3';         # SNMP-FRAMEWORK-MIB
-
-my @oid_uptime_types = ( ['', '', ''],		      	      # type 0 is reserved
-	   [ 'local', '', ''],                                # type 1 is local
-           [ 'win', 'sysUpTime', $oid_sysUptime ], 	      # type 2 is windows
-	   [ 'unix-host', 'hostUpTime', $oid_hostUptime ],    # type 3 is unix-host
-	   [ 'unix-sys', 'sysUpTime', $oid_sysUptime ],       # type 4 is unix-sys
-	   [ 'net', 'engineTime', $oid_engineTime ]);         # type 5 is netswitch 
-
-# Not used, but perhaps later
-my $oid_hrLoad = '1.3.6.1.2.1.25.3.3.1.2.1';
-my $oid_sysLoadInt1 = '1.3.6.1.4.1.2021.10.1.5.1';
-my $oid_sysLoadInt5 = '1.3.6.1.4.1.2021.10.1.5.2';
-my $oid_sysLoadInt15 = '1.3.6.1.4.1.2021.10.1.5.3';
-
-# Standard options
-my $o_host = 		undef; 	# hostname
-my $o_timeout=  	undef;  # Timeout (Default 10) 
-my $o_help=		undef; 	# wan't some help ?
-my $o_verb=		undef;	# verbose mode
-my $o_version=		undef;	# print version
-my $o_label=		undef;	# change label instead of printing uptime
-my $o_perf=             undef;  # Output performance data (uptime in minutes)
-my $o_prevperf=		undef;	# performance data given with $SERVICEPERFDATA$ macro
-my $o_warn=             undef;  # WARNING alert if system has been up for < specified number of minutes
-my $o_crit=             undef;  # CRITICAL alert if system has been up for < specified number of minutes
-my $o_type=             undef;  # type of check (local, auto, unix, win)
-
-# Login and other options specific to SNMP
-my $o_port =		161;    # SNMP port
-my $o_community =	undef; 	# community
-my $o_version2	=	undef;	# use snmp v2c
-my $o_login=		undef;	# Login for snmpv3
-my $o_passwd=		undef;	# Pass for snmpv3
-my $v3protocols=	undef;	# V3 protocol list.
-my $o_authproto=	'md5';	# Auth protocol
-my $o_privproto=	'des';	# Priv protocol
-my $o_privpass= 	undef;	# priv password
-
-## Additional global variables
-my %prev_perf=	();     # array that is populated with previous performance data
-my $check_type = 0;
-
-sub p_version { print "check_uptime version : $Version\n"; }
-
-sub print_usage {
-    print "Usage: $0 [-v [debugfilename]] [-T local|unix-host|unix-sys|win|net] [-H <host> (-C <snmp_community>) [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>) [-p <port>]] [-w <warn minutes> -s <crit minutes>] [-f] [-P <previous perf data from nagios \$SERVICEPERFDATA\$>] [-t <timeout>] | [-V] [--label <string>]\n";
-}
-
-sub isnnum { # Return true if arg is not a number
-  my $num = shift;
-  if ( $num =~ /^(\d+\.?\d*)|(^\.\d+)$/ ) { return 0 ;}
-  return 1;
-}
-
-sub div_mod { return int( $_[0]/$_[1]) , ($_[0] % $_[1]); }
-
-sub help {
-   print "\nUptime Plugin for Nagios (check_uptime) v. ",$Version,"\n";
-   print "GPL licence, (c) 2008-2012 William Leibzon\n\n";
-   print_usage();
-   print <<EOT;
-
-Debug & Console Options:
- -v, --verbose[=FILENAME], --debug[=FILENAME]
-   print extra debugging information.
-   if filename is specified instead of STDOUT the debug data is written to that file
- -h, --help
-   print this help message
- -V, --version
-   prints version number
-
-Standard Options:
- -T, --type=auto|local|unix-host|unis-sys|windows|netswitch
-   Type of system:
-     local           : localhost (executes 'uptime' command), default if no -C or -l
-     unix-host       : SNMP check from hostUptime ($oid_hostUptime) OID
-     unix-sys        : SNMP check from sysUptime ($oid_sysUptime) OID
-     win | windows   : SNMP check from sysUptime ($oid_sysUptime) OID
-     net | netswitch : SNMP check from snmpEngineTime ($oid_engineTime) OID
-     auto            : Autodetect what system by checking sysSystem OID first, default
- -w, --warning[=minutes]
-   Report nagios WARNING alert if system has been up for less then specified
-   number of minutes. If no minutes are specified but previous preformance
-   data is fed back with -P option then alert is sent ONLY ONCE when
-   uptime changes from greater value to smaller
- -c, --critical[=minutes]
-   Report nagios CRITICAL alert if system has been up for less then
-   specified number of minutes or ONE ALERT if -P option is used and
-   system's previous uptime is larger then current on
- -f, --perfparse
-   Perfparse compatible output 
- -P, --prev_perfdata
-   Previous performance data (normally put '-P \$SERVICEPERFDATA\$' in
-   nagios command definition). This is recommended if you dont specify
-   type of system with -T so that previously checked type of system info
-   is reused. This is also used to decide on warning/critical condition
-   if number of seconds is not specified with -w or -c.
- --label=[string]
-   Optional custom label before results prefixed to results
- -t, --timeout=INTEGER
-   timeout for SNMP in seconds (Default: 15)
- 
-SNMP Access Options:
- -H, --hostname=HOST
-   name or IP address of host to check (if not localhost)
- -C, --community=COMMUNITY NAME
-   community name for the SNMP agent (used with v1 or v2c protocols)
- -2, --v2c
-   use snmp v2c (can not be used with -l, -x)
- -l, --login=LOGIN ; -x, --passwd=PASSWD
-   Login and auth password for snmpv3 authentication 
-   If no priv password exists, implies AuthNoPriv 
- -X, --privpass=PASSWD
-   Priv password for snmpv3 (AuthPriv protocol)
- -L, --protocols=<authproto>,<privproto>
-   <authproto> : Authentication protocol (md5|sha : default md5)
-   <privproto> : Priv protocols (des|aes : default des) 
- -p, --port=PORT
-   SNMP port (Default 161)
-EOT
-}
-
-# For verbose output (updated 06/06/12 to write to debug file if specified)
-sub verb {
-    my $t=shift;
-    if (defined($o_verb)) {
-        if ($o_verb eq "") {
-                print $t,"\n";
-        }
-        else {
-            if (!open(DEBUGFILE, ">>$o_verb")) {
-                print $t, "\n";
-            }
-            else {
-                print DEBUGFILE $t,"\n";
-                close DEBUGFILE;
-            }
-        }
-    }
-}
-
-# load previous performance data 
-sub process_perf {
- my %pdh;
- my ($nm,$dt);
- foreach (split(' ',$_[0])) {
-   if (/(.*)=(.*)/) {
-        ($nm,$dt)=($1,$2);
-        verb("prev_perf: $nm = $dt");
-	# in some of my plugins time_ is to profile how long execution takes for some part of plugin
-        # $pdh{$nm}=$dt if $nm !~ /^time_/;
-	$pdh{$nm}=$dt;
-   }
- }
- return %pdh;
-}
-
-sub type_from_name {
-  my $type=shift;
-  for(my $i=1; $i<scalar(@oid_uptime_types); $i++) {
-      if ($oid_uptime_types[$i][0] eq $type) {
-          return $i;
-      }
-   }
-   return -1;
-}
-
-
-sub check_options {
-    Getopt::Long::Configure ("bundling");
-	GetOptions(
-   	'v:s'	=> \$o_verb,		'verbose:s'	=> \$o_verb,  "debug:s" => \$o_verb,
-        'h'     => \$o_help,    	'help'        	=> \$o_help,
-        'H:s'   => \$o_host,		'hostname:s'	=> \$o_host,
-        'p:i'   => \$o_port,   		'port:i'	=> \$o_port,
-        'C:s'   => \$o_community,	'community:s'	=> \$o_community,
-	 '2'	=> \$o_version2,	'v2c'		=> \$o_version2,
-	'l:s'	=> \$o_login,		'login:s'	=> \$o_login,
-	'x:s'	=> \$o_passwd,		'passwd:s'	=> \$o_passwd,
-	'X:s'	=> \$o_privpass,	'privpass:s'	=> \$o_privpass,
-	'L:s'	=> \$v3protocols,	'protocols:s'	=> \$v3protocols,
-        't:i'   => \$o_timeout,    	'timeout:i'	=> \$o_timeout,
-	'V'	=> \$o_version,		'version'	=> \$o_version,
-        'f'     => \$o_perf,            'perfparse'     => \$o_perf,
-        'w:i'   => \$o_warn,       	'warning:i'   	=> \$o_warn,
-        'c:i'   => \$o_crit,      	'critical:i'   	=> \$o_crit,
-	'label:s'   => \$o_label,
-	'P:s'	=> \$o_prevperf,	'prev_perfdata:s' => \$o_prevperf,
-	'T:s'   => \$o_type,            'type:s'        => \$o_type,
-    );
-    if (defined ($o_help) ) { help(); exit $ERRORS{"UNKNOWN"}};
-    if (defined($o_version)) { p_version(); exit $ERRORS{"UNKNOWN"}};
-
-    $o_type = "win" if defined($o_type) && $o_type eq 'windows';
-    $o_type = "net" if defined($o_type) && $o_type eq 'netswitch';
-    if (defined($o_type) && $o_type ne 'auto' && type_from_name($o_type)==-1) {
-	print "Invalid system type specified\n"; print_usage(); exit $ERRORS{"UNNKNOWN"};
-    }
-
-    if (!defined($o_community) && (!defined($o_login) || !defined($o_passwd)) ) { 
-	 $o_type='local' if !defined($o_type) || $o_type eq 'auto';
-	 if ($o_type ne 'local') {
-            print "Put snmp login info!\n"; print_usage(); exit $ERRORS{"UNKNOWN"}
-         }
-	 if (defined($o_host)) {
-	    print "Why are you specifying hostname without SNMP parameters?\n"; print_usage(); exit $ERRORS{"UNKNOWN"};
-	 }
-    }
-    else {
-         $o_type='auto' if !defined($o_type);
-         if ($o_type eq 'local' ) {
-	     print "Why are you specifying SNMP login for local system???\n"; print_usage(); exit $ERRORS{"UNKNOWN"}
-         }
-         if (!defined($o_host)) {
-             print "Hostname required for SNMP check.\n"; print_usage(); exit $ERRORS{"UNKNOWN"};
-         }
-	 if ($no_snmp) {
-	     print "Can't locate Net/SNMP.pm\n"; print_usage(); exit $ERRORS{"UNKNOWN"};
-	 }
-    }
-
-    # check snmp information
-    if ((defined($o_login) || defined($o_passwd)) && (defined($o_community) || defined($o_version2)) )
-	{ print "Can't mix snmp v1,2c,3 protocols!\n"; print_usage(); exit $ERRORS{"UNKNOWN"}}
-    if (defined ($v3protocols)) {
-	if (!defined($o_login)) { print "Put snmp V3 login info with protocols!\n"; print_usage(); exit $ERRORS{"UNKNOWN"}}
-	my @v3proto=split(/,/,$v3protocols);
-	if ((defined ($v3proto[0])) && ($v3proto[0] ne "")) {$o_authproto=$v3proto[0];  }	# Auth protocol
-	if (defined ($v3proto[1])) {$o_privproto=$v3proto[1];	}	# Priv  protocol
-	if ((defined ($v3proto[1])) && (!defined($o_privpass)))
-	  { print "Put snmp V3 priv login info with priv protocols!\n"; print_usage(); exit $ERRORS{"UNKNOWN"}}
-    }
-
-    if (defined($o_timeout) && (isnnum($o_timeout) || ($o_timeout < 2) || ($o_timeout > 60))) 
-	{ print "Timeout must be >1 and <60 !\n"; print_usage(); exit $ERRORS{"UNKNOWN"}}
-    if (!defined($o_timeout)) {$o_timeout=$TIMEOUT+5;}
-
-    if (defined($o_prevperf)) {
-        if (defined($o_perf)) {
-               %prev_perf=process_perf($o_prevperf);
-	       $check_type = $prev_perf{type} if $o_type eq 'auto' && exists($prev_perf{tye}) && exists($oid_uptime_types[$prev_perf{type}][0]);
-	}
-        else {
-               print "need -f option first \n"; print_usage(); exit $ERRORS{"UNKNOWN"};
-        }
-    }
-
-    if ($o_type eq 'auto') {
-        $check_type=0;
-    }
-    else {
-        $check_type = type_from_name($o_type);
-    }
-}
-
-sub create_snmp_session {
-  my ($session,$error);
-
-  if ( defined($o_login) && defined($o_passwd)) {
-    # SNMPv3 login
-    if (!defined ($o_privpass)) {
-     verb("SNMPv3 AuthNoPriv login : $o_login, $o_authproto");
-     ($session, $error) = Net::SNMP->session(
-      -hostname   	=> $o_host,
-      -version		=> '3',
-      -port      	=> $o_port,
-      -username		=> $o_login,
-      -authpassword	=> $o_passwd,
-      -authprotocol	=> $o_authproto,
-      -timeout          => $o_timeout
-     );  
-    } else {
-     verb("SNMPv3 AuthPriv login : $o_login, $o_authproto, $o_privproto");
-     ($session, $error) = Net::SNMP->session(
-      -hostname   	=> $o_host,
-      -version		=> '3',
-      -username		=> $o_login,
-      -port      	=> $o_port,
-      -authpassword	=> $o_passwd,
-      -authprotocol	=> $o_authproto,
-      -privpassword	=> $o_privpass,
-      -privprotocol     => $o_privproto,
-      -timeout          => $o_timeout
-     );
-    }
-  } else {
-    if (defined ($o_version2)) {
-    # SNMPv2c Login
-      verb("SNMP v2c login");
-      ($session, $error) = Net::SNMP->session(
-       -hostname  => $o_host,
-       -version   => 2,
-       -community => $o_community,
-       -port      => $o_port,
-       -timeout   => $o_timeout
-      );
-    } else {
-    # SNMPV1 login
-      verb("SNMP v1 login");
-      ($session, $error) = Net::SNMP->session(
-       -hostname  => $o_host,
-       -community => $o_community,
-       -port      => $o_port,
-       -timeout   => $o_timeout
-      );
-    }
-  }
-  if (!defined($session)) {
-     printf("ERROR opening session: %s.\n", $error);
-     exit $ERRORS{"UNKNOWN"};
-  }
-
-  return $session;
-}
-
-$SIG{'ALRM'} = sub {
- print "Alarm timeout\n";
- exit $ERRORS{"UNKNOWN"};
-};
-
-########## MAIN #######
-my $system_info="";
-my $uptime_info=undef;
-my $uptime_minutes=undef;
-my $perf_out="";
-my $status=0;
-my $uptime_output;
-my ($days, $hrs, $mins);
-
-check_options();
-
-# Check gobal timeout if snmp screws up
-if (defined($o_timeout)) {
-  verb("Alarm at $o_timeout + 5");
-  alarm($o_timeout+5);
-}
-
-if ($check_type==1) {  # local
-  # Process unix uptime command output
-  $uptime_output=`uptime`;
-  verb("Local Uptime Result is: $uptime_output");
-  if ($uptime_output =~ /(\d+)\s+days?,\s+(\d+)\:(\d+)/) {
-     ($days, $hrs, $mins) = ($1, $2, $3);
-  }
-  elsif ($uptime_output =~ /up\s+(\d+)\shours?\s+(\d+)/) {
-     ($days, $hrs, $mins) = (0, $1, $2);
-  }
-  elsif ($uptime_output =~ /up\s+(\d+)\:(\d+)/) {
-     ($days, $hrs, $mins) = (0, $1, $2);
-  }
-  elsif ($uptime_output =~ /up\s+(\d+)\s+min/) {
-     ($days, $hrs, $mins) = (0,0,$1);
-  }
-  elsif ($uptime_output =~ /up\s+(d+)s+days?,s+(d+)s+min/) {
-     ($days, $hrs, $mins) = ($1,0,$2);
-  }
-  else {
-     $uptime_info = "up ".$uptime_output;
-  }
-  if (defined($days) && defined($hrs) && defined($mins)) {
-     $uptime_minutes = $days*24*60+$hrs*60+$mins;
-  }
-  my @temp=split(' ',`uname -a`);
-  if (scalar(@temp)<3) {
-        $system_info=`uname -a`;
-  }
-  else {
-        $system_info=join(' ',$temp[0],$temp[1],$temp[2]);
-  }
-}
-else {
-  # SNMP connection
-  my $session=create_snmp_session();
-  my $result=undef;
-  my $oid="";
-  my $guessed_check_type=0;
-
-  if ($check_type==0){
-      $result = $session->get_request(-varbindlist=>[$oid_sysSystem]);
-      if (!defined($result)) {
-            printf("ERROR: Can not retrieve $oid_sysSystem table: %s.\n", $session->error);
-            $session->close;
-            exit $ERRORS{"UNKNOWN"};
-      }
-      verb("$o_host SysInfo Result from OID $oid_sysSystem: $result->{$oid_sysSystem}");
-      if ($result->{$oid_sysSystem} =~ /Windows/) {
-	  $guessed_check_type=2;
-	  verb('Guessing Type: 2 = windows');
-      }
-      if ($result->{$oid_sysSystem} =~ /Cisco/) {
-	  $guessed_check_type=5;
-	  verb('Guessing Type: 5 = netswitch');
-      }
-      if ($guessed_check_type==0) {
-	  $guessed_check_type=3; # will try hostUptime first
-      }
-      $oid=$oid_uptime_types[$guessed_check_type][2];
-  }
-  else {
-      $oid=$oid_uptime_types[$check_type][2];
-  }
-
-  do {
-      $result = $session->get_request(-varbindlist=>[$oid,$oid_sysSystem]);
-      if (!defined($result)) {
-          if ($check_type!=0) {
-              printf("ERROR: Can not retrieve uptime OID table $oid: %s.\n", $session->error);
-              $session->close;
-              exit $ERRORS{"UNKNOWN"};
-          }
-          else {
-              if ($session->error =~ /noSuchName/) {
-		  if ($guessed_check_type==4) {
-                      verb("Received noSuchName error for sysUpTime OID $oid. Giving up.");
-                      $guessed_check_type=0;
-		  } 
-	          if ($guessed_check_type==3) {
-            	      verb("Received noSuchName error for hostUpTime OID $oid, will now try sysUpTime");
-		      $guessed_check_type=4;
-	          }
-	          else {
-		      verb("Received noSuchName error for OID $oid, will now try hostUpTime");
-		      $guessed_check_type=3;
-		  }
-		  if ($guessed_check_type!=0) {
-		      $oid=$oid_uptime_types[$guessed_check_type][2];
-		  }
-	      }
-	      else {
-		  printf("ERROR: Can not retrieve uptime OID table $oid: %s.\n", $session->error);
-         	  $session->close;
-         	  exit $ERRORS{"UNKNOWN"};
-	      }
-	  }
-      }
-      else {
-          if ($check_type==0) {
-	      $check_type=$guessed_check_type;
-	  }
-      }
-  }
-  while (!defined($result) && $guessed_check_type!=0);
-
-  $session->close;
-  if ($check_type==0 && $guessed_check_type==0) {
-        printf("ERROR: Can not autodetermine proper uptime OID table. Giving up.\n");
-        exit $ERRORS{"UNKNOWN"};
-  }
-
-  my ($days, $hrs, $mins);
-  $uptime_output=$result->{$oid};
-  verb("$o_host Uptime Result from OID $oid: $uptime_output");
-
-  if ($uptime_output =~ /(\d+)\s+days?,\s+(\d+)\:(\d+)/) {
-    ($days, $hrs, $mins) = ($1, $2, $3);
-  }
-  elsif ($uptime_output =~ /(\d+)\s+hours?,\s+(\d+)\:(\d+)/) {
-    ($days, $hrs, $mins) = (0, $1, $2);
-  }
-  elsif ($uptime_output =~ /(\d+)\s+min/) {
-    ($days, $hrs, $mins) = (0, 0, $1);
-  }
-  if (defined($days) && defined($hrs) && defined($mins)) {
-    $uptime_minutes = $days*24*60+$hrs*60+$mins;
-  }
-  elsif ($uptime_output =~ /^(\d+)$/) {
-    my $upnum = $1;
-    if ($oid eq $oid_sysUptime) {
-	$uptime_minutes = $upnum/100/60; 
-    }
-    elsif ($oid eq $oid_engineTime) {
-	$uptime_minutes = $upnum/60;
-    }
-  }
-  else {
-    $uptime_info = "up ".$uptime_output;
-  }
-  my @temp=split(' ',$result->{$oid_sysSystem});
-  if (scalar(@temp)<3) {
-	$system_info=$result->{$oid_sysSystem};
-  }
-  else {
-	$system_info=join(' ',$temp[0],$temp[1],$temp[2]);
-  }
-}
-
-if (defined($uptime_minutes) && !defined($uptime_info)) {
-  ($hrs,$mins) = div_mod($uptime_minutes,60);
-  ($days,$hrs) = div_mod($hrs,24);
-  $uptime_info = "up ";
-  $uptime_info .= "$days days " if $days>0;
-  $uptime_info .= "$hrs hours " if $hrs>0;
-  $uptime_info .= "$mins minutes";
-}
-
-verb("System Type: $check_type (".$oid_uptime_types[$check_type][0].")");
-verb("System Info: $system_info") if $system_info;
-verb("Uptime Text: $uptime_info") if defined($uptime_info);
-verb("Uptime Minutes: $uptime_minutes") if defined($uptime_minutes);
-
-if (!defined($uptime_info)) {
-  $uptime_info = "Can not determine uptime";
-  $status = 3;
-}
-
-if (defined($o_perf)) {
-  $perf_out = "type=$check_type";
-  $perf_out .= " uptime_minutes=$uptime_minutes" if defined($uptime_minutes);
-}
-
-if (defined($uptime_minutes)) {
-  if (defined($o_prevperf)) {
-   	$status = 1 if defined($o_warn) && exists($prev_perf{uptime_minutes}) && $prev_perf{uptime_minutes} > $uptime_minutes;
-   	$status = 2 if defined($o_crit) && exists($prev_perf{uptime_minutes}) && $prev_perf{uptime_minutes} > $uptime_minutes;
-  }
-  else {
-   	$status = 1 if defined($o_warn) && !isnnum($o_warn) && $o_warn >= $uptime_minutes;
-   	$status = 2 if defined($o_crit) && !isnnum($o_crit) && $o_crit >= $uptime_minutes;
-  }
-}
-alarm(0);
-
-my $exit_status="UNKNOWN";
-$exit_status="OK" if $status==0;
-$exit_status="WARNING" if $status==1;
-$exit_status="CRITICAL" if $status==2;
-$exit_status="UNKNOWN" if $status==3;
-$exit_status="$o_label $exit_status" if defined($o_label);
-print "$exit_status: $system_info";
-print " - $uptime_info";
-print " | ",$perf_out if $perf_out;
-print "\n";
-exit $status;
diff --git a/global/overlay/etc/puppet/modules/sunet/templates/nagioshost/nrpe.cfg.erb b/global/overlay/etc/puppet/modules/sunet/templates/nagioshost/nrpe.cfg.erb
deleted file mode 100644
index 960dd61..0000000
--- a/global/overlay/etc/puppet/modules/sunet/templates/nagioshost/nrpe.cfg.erb
+++ /dev/null
@@ -1,262 +0,0 @@
-<%# nrpe.cfg %>
-
-# ###################################################
-# # #
-# # # This file is managed with
-# # #
-# # #  #####   #    #  #####   #####   ######   #####
-# # #  #    #  #    #  #    #  #    #  #          #
-# # #  #    #  #    #  #    #  #    #  #####      #
-# # #  #####   #    #  #####   #####   #          #
-# # #  #       #    #  #       #       #          #
-# # #  #        ####   #       #       ######     #
-# # #
-# # # ... so you can't just change it locally.
-# # #
-# # ###################################################
-
-#############################################################################
-# Sample NRPE Config File 
-# Written by: Ethan Galstad (nagios@nagios.org)
-# 
-# Last Modified: 11-23-2007
-#
-# NOTES:
-# This is a sample configuration file for the NRPE daemon.  It needs to be
-# located on the remote host that is running the NRPE daemon, not the host
-# from which the check_nrpe client is being executed.
-#############################################################################
-
-
-# LOG FACILITY
-# The syslog facility that should be used for logging purposes.
-
-log_facility=daemon
-
-
-
-# PID FILE
-# The name of the file in which the NRPE daemon should write it's process ID
-# number.  The file is only written if the NRPE daemon is started by the root
-# user and is running in standalone mode.
-
-pid_file=/var/run/nagios/nrpe.pid
-
-
-
-# PORT NUMBER
-# Port number we should wait for connections on.
-# NOTE: This must be a non-priviledged port (i.e. > 1024).
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-server_port=5666
-
-
-
-# SERVER ADDRESS
-# Address that nrpe should bind to in case there are more than one interface
-# and you do not want nrpe to bind on all interfaces.
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-#server_address=127.0.0.1
-
-
-
-# NRPE USER
-# This determines the effective user that the NRPE daemon should run as.  
-# You can either supply a username or a UID.
-# 
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-nrpe_user=nagios
-
-
-
-# NRPE GROUP
-# This determines the effective group that the NRPE daemon should run as.  
-# You can either supply a group name or a GID.
-# 
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-nrpe_group=nagios
-
-
-
-# ALLOWED HOST ADDRESSES
-# This is an optional comma-delimited list of IP address or hostnames 
-# that are allowed to talk to the NRPE daemon. Network addresses with a bit mask
-# (i.e. 192.168.1.0/24) are also supported. Hostname wildcards are not currently 
-# supported.
-#
-# Note: The daemon only does rudimentary checking of the client's IP
-# address.  I would highly recommend adding entries in your /etc/hosts.allow
-# file to allow only the specified host to connect to the port
-# you are running this daemon on.
-#
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-allowed_hosts= <%= @allowed_hosts %>
-
-# COMMAND ARGUMENT PROCESSING
-# This option determines whether or not the NRPE daemon will allow clients
-# to specify arguments to commands that are executed.  This option only works
-# if the daemon was configured with the --enable-command-args configure script
-# option.  
-#
-# *** ENABLING THIS OPTION IS A SECURITY RISK! *** 
-# Read the SECURITY file for information on some of the security implications
-# of enabling this variable.
-#
-# Values: 0=do not allow arguments, 1=allow command arguments
-
-dont_blame_nrpe=0
-
-
-
-# BASH COMMAND SUBTITUTION
-# This option determines whether or not the NRPE daemon will allow clients
-# to specify arguments that contain bash command substitutions of the form
-# $(...).  This option only works if the daemon was configured with both 
-# the --enable-command-args and --enable-bash-command-substitution configure 
-# script options.
-#
-# *** ENABLING THIS OPTION IS A HIGH SECURITY RISK! *** 
-# Read the SECURITY file for information on some of the security implications
-# of enabling this variable.
-#
-# Values: 0=do not allow bash command substitutions, 
-#         1=allow bash command substitutions
-
-allow_bash_command_substitution=0
-
-
-
-# COMMAND PREFIX
-# This option allows you to prefix all commands with a user-defined string.
-# A space is automatically added between the specified prefix string and the
-# command line from the command definition.
-#
-# *** THIS EXAMPLE MAY POSE A POTENTIAL SECURITY RISK, SO USE WITH CAUTION! ***
-# Usage scenario: 
-# Execute restricted commmands using sudo.  For this to work, you need to add
-# the nagios user to your /etc/sudoers.  An example entry for alllowing 
-# execution of the plugins from might be:
-#
-# nagios          ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/
-#
-# This lets the nagios user run all commands in that directory (and only them)
-# without asking for a password.  If you do this, make sure you don't give
-# random users write access to that directory or its contents!
-
-# command_prefix=/usr/bin/sudo 
-
-
-
-# DEBUGGING OPTION
-# This option determines whether or not debugging messages are logged to the
-# syslog facility.
-# Values: 0=debugging off, 1=debugging on
-
-debug=0
-
-
-
-# COMMAND TIMEOUT
-# This specifies the maximum number of seconds that the NRPE daemon will
-# allow plugins to finish executing before killing them off.
-
-command_timeout=60
-
-
-
-# CONNECTION TIMEOUT
-# This specifies the maximum number of seconds that the NRPE daemon will
-# wait for a connection to be established before exiting. This is sometimes
-# seen where a network problem stops the SSL being established even though
-# all network sessions are connected. This causes the nrpe daemons to
-# accumulate, eating system resources. Do not set this too low.
-
-connection_timeout=300
-
-
-
-# WEEK RANDOM SEED OPTION
-# This directive allows you to use SSL even if your system does not have
-# a /dev/random or /dev/urandom (on purpose or because the necessary patches
-# were not applied). The random number generator will be seeded from a file
-# which is either a file pointed to by the environment valiable $RANDFILE
-# or $HOME/.rnd. If neither exists, the pseudo random number generator will
-# be initialized and a warning will be issued.
-# Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness
-
-#allow_weak_random_seed=1
-
-
-
-# INCLUDE CONFIG FILE
-# This directive allows you to include definitions from an external config file.
-
-#include=<somefile.cfg>
-
-
-
-# INCLUDE CONFIG DIRECTORY
-# This directive allows you to include definitions from config files (with a
-# .cfg extension) in one or more directories (with recursion).
-
-#include_dir=<somedirectory>
-#include_dir=<someotherdirectory>
-
-
-
-# COMMAND DEFINITIONS
-# Command definitions that this daemon will run.  Definitions
-# are in the following format:
-#
-# command[<command_name>]=<command_line>
-#
-# When the daemon receives a request to return the results of <command_name>
-# it will execute the command specified by the <command_line> argument.
-#
-# Unlike Nagios, the command line cannot contain macros - it must be
-# typed exactly as it should be executed.
-#
-# Note: Any plugins that are used in the command lines must reside
-# on the machine that this daemon is running on!  The examples below
-# assume that you have plugins installed in a /usr/local/nagios/libexec
-# directory.  Also note that you will have to modify the definitions below
-# to match the argument format the plugins expect.  Remember, these are
-# examples only!
-
-
-# The following examples use hardcoded command arguments...
-
-command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10
-command[check_load]=/usr/lib/nagios/plugins/check_load -w 15,10,5 -c 30,25,20
-command[check_root]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% -p /
-command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z
-command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200 
-command[check_uptime]=/usr/lib/nagios/plugins/check_uptime.pl -f
-command[check_reboot]=/usr/lib/nagios/plugins/check_reboot
-
-# The following examples allow user-supplied arguments and can
-# only be used if the NRPE daemon was compiled with support for 
-# command arguments *AND* the dont_blame_nrpe directive in this
-# config file is set to '1'.  This poses a potential security risk, so
-# make sure you read the SECURITY file before doing this.
-
-#command[check_users]=/usr/lib/nagios/plugins/check_users -w $ARG1$ -c $ARG2$
-#command[check_load]=/usr/lib/nagios/plugins/check_load -w $ARG1$ -c $ARG2$
-#command[check_disk]=/usr/lib/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
-#command[check_procs]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
-
-#
-# local configuration:
-#	if you'd prefer, you can instead place directives here
-include=/etc/nagios/nrpe_local.cfg
-
-# 
-# you can place your config snipplets into nrpe.d/
-# only snipplets ending in .cfg will get included
-include_dir=/etc/nagios/nrpe.d/
-