Moving nagios config to class sunet::nagios.

1 files changed, 0 insertions, 246 deletions

diff --git a/sto-tug-kvm2.swamid.se/overlay/etc/nagios/nrpe.cfg b/sto-tug-kvm2.swamid.se/overlay/etc/nagios/nrpe.cfg
deleted file mode 100644
index 043ea90..0000000
--- a/sto-tug-kvm2.swamid.se/overlay/etc/nagios/nrpe.cfg
+++ /dev/null
@@ -1,246 +0,0 @@
-#############################################################################
-# Sample NRPE Config File 
-# Written by: Ethan Galstad (nagios@nagios.org)
-# 
-# Last Modified: 11-23-2007
-#
-# NOTES:
-# This is a sample configuration file for the NRPE daemon.  It needs to be
-# located on the remote host that is running the NRPE daemon, not the host
-# from which the check_nrpe client is being executed.
-#############################################################################
-
-
-# LOG FACILITY
-# The syslog facility that should be used for logging purposes.
-
-log_facility=daemon
-
-
-
-# PID FILE
-# The name of the file in which the NRPE daemon should write it's process ID
-# number.  The file is only written if the NRPE daemon is started by the root
-# user and is running in standalone mode.
-
-pid_file=/var/run/nagios/nrpe.pid
-
-
-
-# PORT NUMBER
-# Port number we should wait for connections on.
-# NOTE: This must be a non-priviledged port (i.e. > 1024).
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-server_port=5666
-
-
-
-# SERVER ADDRESS
-# Address that nrpe should bind to in case there are more than one interface
-# and you do not want nrpe to bind on all interfaces.
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-#server_address=127.0.0.1
-
-
-
-# NRPE USER
-# This determines the effective user that the NRPE daemon should run as.  
-# You can either supply a username or a UID.
-# 
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-nrpe_user=nagios
-
-
-
-# NRPE GROUP
-# This determines the effective group that the NRPE daemon should run as.  
-# You can either supply a group name or a GID.
-# 
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-nrpe_group=nagios
-
-
-
-# ALLOWED HOST ADDRESSES
-# This is an optional comma-delimited list of IP address or hostnames 
-# that are allowed to talk to the NRPE daemon. Network addresses with a bit mask
-# (i.e. 192.168.1.0/24) are also supported. Hostname wildcards are not currently 
-# supported.
-#
-# Note: The daemon only does rudimentary checking of the client's IP
-# address.  I would highly recommend adding entries in your /etc/hosts.allow
-# file to allow only the specified host to connect to the port
-# you are running this daemon on.
-#
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-allowed_hosts=109.105.111.111,2001:948:4:6::111
- 
-
-
-# COMMAND ARGUMENT PROCESSING
-# This option determines whether or not the NRPE daemon will allow clients
-# to specify arguments to commands that are executed.  This option only works
-# if the daemon was configured with the --enable-command-args configure script
-# option.  
-#
-# *** ENABLING THIS OPTION IS A SECURITY RISK! *** 
-# Read the SECURITY file for information on some of the security implications
-# of enabling this variable.
-#
-# Values: 0=do not allow arguments, 1=allow command arguments
-
-dont_blame_nrpe=0
-
-
-
-# BASH COMMAND SUBTITUTION
-# This option determines whether or not the NRPE daemon will allow clients
-# to specify arguments that contain bash command substitutions of the form
-# $(...).  This option only works if the daemon was configured with both 
-# the --enable-command-args and --enable-bash-command-substitution configure 
-# script options.
-#
-# *** ENABLING THIS OPTION IS A HIGH SECURITY RISK! *** 
-# Read the SECURITY file for information on some of the security implications
-# of enabling this variable.
-#
-# Values: 0=do not allow bash command substitutions, 
-#         1=allow bash command substitutions
-
-allow_bash_command_substitution=0
-
-
-
-# COMMAND PREFIX
-# This option allows you to prefix all commands with a user-defined string.
-# A space is automatically added between the specified prefix string and the
-# command line from the command definition.
-#
-# *** THIS EXAMPLE MAY POSE A POTENTIAL SECURITY RISK, SO USE WITH CAUTION! ***
-# Usage scenario: 
-# Execute restricted commmands using sudo.  For this to work, you need to add
-# the nagios user to your /etc/sudoers.  An example entry for alllowing 
-# execution of the plugins from might be:
-#
-# nagios          ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/
-#
-# This lets the nagios user run all commands in that directory (and only them)
-# without asking for a password.  If you do this, make sure you don't give
-# random users write access to that directory or its contents!
-
-# command_prefix=/usr/bin/sudo 
-
-
-
-# DEBUGGING OPTION
-# This option determines whether or not debugging messages are logged to the
-# syslog facility.
-# Values: 0=debugging off, 1=debugging on
-
-debug=0
-
-
-
-# COMMAND TIMEOUT
-# This specifies the maximum number of seconds that the NRPE daemon will
-# allow plugins to finish executing before killing them off.
-
-command_timeout=60
-
-
-
-# CONNECTION TIMEOUT
-# This specifies the maximum number of seconds that the NRPE daemon will
-# wait for a connection to be established before exiting. This is sometimes
-# seen where a network problem stops the SSL being established even though
-# all network sessions are connected. This causes the nrpe daemons to
-# accumulate, eating system resources. Do not set this too low.
-
-connection_timeout=300
-
-
-
-# WEEK RANDOM SEED OPTION
-# This directive allows you to use SSL even if your system does not have
-# a /dev/random or /dev/urandom (on purpose or because the necessary patches
-# were not applied). The random number generator will be seeded from a file
-# which is either a file pointed to by the environment valiable $RANDFILE
-# or $HOME/.rnd. If neither exists, the pseudo random number generator will
-# be initialized and a warning will be issued.
-# Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness
-
-#allow_weak_random_seed=1
-
-
-
-# INCLUDE CONFIG FILE
-# This directive allows you to include definitions from an external config file.
-
-#include=<somefile.cfg>
-
-
-
-# INCLUDE CONFIG DIRECTORY
-# This directive allows you to include definitions from config files (with a
-# .cfg extension) in one or more directories (with recursion).
-
-#include_dir=<somedirectory>
-#include_dir=<someotherdirectory>
-
-
-
-# COMMAND DEFINITIONS
-# Command definitions that this daemon will run.  Definitions
-# are in the following format:
-#
-# command[<command_name>]=<command_line>
-#
-# When the daemon receives a request to return the results of <command_name>
-# it will execute the command specified by the <command_line> argument.
-#
-# Unlike Nagios, the command line cannot contain macros - it must be
-# typed exactly as it should be executed.
-#
-# Note: Any plugins that are used in the command lines must reside
-# on the machine that this daemon is running on!  The examples below
-# assume that you have plugins installed in a /usr/local/nagios/libexec
-# directory.  Also note that you will have to modify the definitions below
-# to match the argument format the plugins expect.  Remember, these are
-# examples only!
-
-
-# The following examples use hardcoded command arguments...
-
-command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10
-command[check_load]=/usr/lib/nagios/plugins/check_load -w 15,10,5 -c 30,25,20
-command[check_root]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% -p /
-command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z
-command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200 
-
-
-# The following examples allow user-supplied arguments and can
-# only be used if the NRPE daemon was compiled with support for 
-# command arguments *AND* the dont_blame_nrpe directive in this
-# config file is set to '1'.  This poses a potential security risk, so
-# make sure you read the SECURITY file before doing this.
-
-#command[check_users]=/usr/lib/nagios/plugins/check_users -w $ARG1$ -c $ARG2$
-#command[check_load]=/usr/lib/nagios/plugins/check_load -w $ARG1$ -c $ARG2$
-#command[check_disk]=/usr/lib/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
-#command[check_procs]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
-
-#
-# local configuration:
-#	if you'd prefer, you can instead place directives here
-include=/etc/nagios/nrpe_local.cfg
-
-# 
-# you can place your config snipplets into nrpe.d/
-# only snipplets ending in .cfg will get included
-include_dir=/etc/nagios/nrpe.d/
-